ESD- Tacky Stick
Model: HOST-2019-ESDC009
Material: PC handle with Polymer Tacky Tip
2 length available：
1、 75 mm long PC handle
2、 150 mm long PC handle
Characteristics：
· Tacky tip to pick up loose particles or fibers
· Soft, flexible tacky tip that leaves no stains on surfaces
· Non- volatile and no unpleasant smell
· No harm when contact with skin
· Silicone free product
Applications:
1. Effective in removing particles or foreign material on laser head, mobile phone or camera lens, or any sensitive optical lens
2. Remove particles or foreign material from LED/ LCD surface
3. Remove particles or foreign material from surface of semi-conductor wafer fab disk
Usage Procedures:
1. Remove the outer packaging before channeling the packaging trays with Tacky Stick through the air shower, into the control or clean room.
2. Perform 5S house- keeping on the work bench, chairs, flooring, equipment, tools and fixtures, etc
3. Gently lift the Tacky Stick from the end without the Sticky Tip. Do not contact the Sticky Tip with any surfaces to avoid cross contamination. It is ready to be used.
4. Adjust the Sticky Tip to the location of the dust or foreign particles to be removed, lightly placed the Sticky Tip onto the target and lift it up. Avoid excessive force or slide the Sticky Tip along the surfaces, especially on sensitive and fragile component.
5. Each Sticky Stick can be used approximately 10-15 times, depending on amount of debris removed from surfaces.
6. Discard the used Sticky Stick to a disposal box and do not mix with new parts.
Packaging Standards：
1、30 pcs per tray
2、3000 pcs per box
